The cationic polyacrylamide (Zetag 8110) can be replaced by the ASIAFLOC series

Product introduction

In organic wastewater, powdery wastewater is often used to flocculate and precipitate wastewater with negative charge of suspended particles in sewage. It is effective to rely on the presence of positive electricity to quickly clarify wastewater in acidic or alkaline media of the flocculation unit. Polyaluminum chloride and cationic polyacrylamide have been widely used in organic wastewater treatment.

Product Introduction:

Powdered cationic polyacrylamide (C4008) is often used in organic wastewater to flocculate and precipitate suspended particles in sewage with negative charge. It is effective to rely on the presence of positive electricity to quickly clarify wastewater in acidic or alkaline media of the flocculation unit. Polyaluminum chloride and cationic polyacrylamide have been widely used in organic wastewater treatment.

Product features:

1, water solubility is good, can also dissolve in cold water.

2, add a small amount of cationic polyacrylamide C4008 products, can be subject to great flocculation effect. Generally, only 0.01~10ppm (0.01~10g/m3) is needed to give full play to the effect.

3, at the same time the use of cationic polyacrylamide products and inorganic flocculant (polymeric ferric sulfate, polymeric aluminum chloride, iron salt, etc.), can show greater effect.

Product use:

1, cationic polyacrylamide C4008 used for sludge dewatering according to the nature of sludge can choose the corresponding model of the product, can effectively in the sludge into the pressure filter before sludge dewatering, dehydration, flocculation, non-stick filter cloth, pressure filter is not loose, flow mud cake thick, dehydration efficiency is high, mud cake moisture content is below 80%.

2, used for domestic sewage and organic wastewater treatment, the product in the compatibility or alkaline medium are positive, so the sewage suspended particles with negative charge of sewage flocculation precipitation, clarification is very effective. Such as the production of grain alcohol wastewater, papermaking wastewater, waste water of urban sewage treatment plant, beer wastewater, gourmet powder factory wastewater, sugar water, high organic content Waste water, waste water feed, textile printing and dyeing wastewater, etc., with cationic cationic PAM than with anionic and nonionic or inorganic salts effect is several times or tens times higher, because this kind of wastewater with negatively charged.

3, used for the treatment of tap water for river water as the source of flocculant, less dosage, good effect, low cost, especially with inorganic flocculant compound use effect is better, it will become the best flocculant for the treatment of the Yangtze River, the Yellow River and other waterworks.

4. Strengthening agent and other additives for paper making. Improve the retention rate of filler, pigment and paper strength.

5, used for oil field economic AIDS, such as clay anti-swelling agent, oil field acidification with thickening agent.

6, used for textile sizing agent, slurry stable performance, less falling pulp, fabric breakage rate is low, clean cloth.

Product Packaging:

Cationic polyacrylamide C4008 solid products are packed in double bags, each bag net weight 25kg, inner plastic bag, outer plastic woven bag. This product should be stored in ventilated and dry warehouse, no rain, damp.